A 100-lb propane tank can run many portable generators about 20–50+ hours depending on size and load. See runtime estimates, fuel-use tables, and formulas.
How Long Will a 100-lb Propane Tank Run a Generator? Read More »
A 20-lb propane tank can run a generator about 5–25 hours depending on generator size and load. See real runtime examples, fuel-use tables, and a simple formula.
How Long Will a 20-lb Propane Tank Run a Generator? Read More »
A propane generator may backfire because of a lean fuel mixture, low propane flow, ignition trouble, incorrect choke use, valve issues, or unburned fuel in the exhaust.
Why Does My Propane Generator Backfire? Read More »
Propane pressure drops when a generator starts because fuel demand rises suddenly. Learn how tank size, regulators, piping, temperature, and restrictions cause pressure loss.
Why Does Propane Pressure Drop When My Generator Starts? Read More »
A propane generator that loses power under load usually has a fuel-flow, regulator, tank-vaporization, air, ignition, or overload problem. Learn what to check.
Why Does My Propane Generator Lose Power Under Load? Read More »
Quick Answer: If your propane generator surges or hunts—meaning the engine repeatedly speeds up and slows down—I usually look for an unstable air-fuel mixture or unstable governor response. On propane, common causes include low or fluctuating fuel pressure, a restricted or undersized regulator or hose, a sticking demand regulator, low tank vaporization, air leaks, incorrect
Why Does My Propane Generator Surge or Hunt? Read More »
Quick Answer: If your dual-fuel generator runs normally on gasoline but will not start on propane, I focus on the propane side of the fuel system. The most common causes are an empty or weak propane cylinder, a cylinder valve that is closed or not fully open, an incorrectly connected regulator hose, the wrong fuel-selector
Why Won’t My Dual-Fuel Generator Start on Propane but Runs on Gasoline? Read More »
Quick Answer: If your propane generator starts and then dies, I usually check fuel supply and propane pressure first, then oil level/low-oil shutdown, overload or output faults, engine temperature, ignition, and the regulator/fuel solenoid. A generator may start on the small amount of propane already in the mixer or fuel line, then shut down seconds
Why Does My Propane Generator Start Then Die? Read More »
Quick Answer: A standby generator does not have one universal propane regulator size. I size the regulator from the generator’s required inlet pressure and full-load propane consumption. Many residential standby generators need roughly 10–14 inches water column at the generator inlet, depending on the manufacturer. For a 14-kW or 16-kW unit, full-load propane demand is
What Size Propane Regulator Does a Standby Generator Need? Read More »
Quick Answer: For a typical residential propane furnace and water heater, I usually look for a low-pressure second-stage regulator or an integral two-stage regulator that supplies about 11 inches water column (11″ w.c.) to the building gas system and has enough BTU capacity for both appliances operating at the same time. For example, a 100,000
What Regulator Do I Need for a Furnace and Water Heater? Read More »
